professionalPractice AvailableBlueprint updated January 2026

CIS-ITSM Practice Questions with Explanations

Certified Implementation Specialist - IT Service Management

How incident, problem, change and request records hand work to each other, what each CIS-ITSM blueprint domain asks, worked industry scenarios, and sourced 2026 exam logistics.

Maintained by the SNReady teamLast updated AI-drafted, human review in progress

See blueprint
Questions on the exam
See blueprint
Duration
Not published
Cut Score
$450
Exam Cost
134
Practice Questions
15
Free Questions

ServiceNow does not publish the cut score, and the official exam blueprint says it is not always 70%. Exams are registered and paid for in ServiceNow University, scheduled through Pearson VUE (source).

CIS-IT Service Management is an exam about hand-offs. Each ITSM application has its own life cycle, but the implementation decisions that matter sit at the seams: when an incident becomes a problem, how a problem's fix becomes a change, which changes are safe enough to pre-approve, and how one catalog order turns into many pieces of fulfilment work. This page walks through those seams using the ServiceNow documentation, so that the blueprint's “architecture, scoping and configuration” objectives have something concrete behind them.

Blueprint

What the CIS-ITSM exam tests

The CIS-ITSM blueprint (KB0011560, updated January 2026) has six domains:

CIS-ITSM blueprint domain weightsIncident Management25%Change Management25%Service Catalog and Request Management25%Problem Management15%Service Portfolio Management5%Configuration Management Database5%
Domain weights from the official CIS-ITSM exam blueprint (KB0011560, updated January 2026).

1. Incident Management (25%)

  • •Architecture
  • •Scoping and Requirements
  • •Configuration: Incident lifecycle

2. Problem Management (15%)

  • •Architecture
  • •Scoping and requirements
  • •Problem Lifecycle Configuration

3. Change Management (25%)

  • •Change Management architecture and configuration

4. Service Portfolio Management (5%)

    5. Service Catalog and Request Management (25%)

    • •Architecture
    • •Scoping and Requirements
    • •Configuration
    • •Integrations

    6. Configuration Management Database (5%)

      Three domains carry 25% each: Incident Management, Change Management, and Service Catalog and Request Management. Together they are three quarters of the exam. For Incident and Service Catalog the objectives follow the same pattern (architecture, scoping and requirements, configuration), with the incident life cycle called out explicitly and integrations added for the catalog. Change Management is described as architecture and configuration. Problem Management (15%) asks about architecture, scoping and the problem life cycle. Service Portfolio Management and the CMDB are 5% each.

      The weighting tells you where to spend time: state models, the records each process creates, and the configuration that moves work between them. Recommended courses on the blueprint include ServiceNow Platform Implementation, CMDB Fundamentals and the instructor-led ITSM Implementation. The credential path also lists two optional practice environments, the ITSM Fundamentals LabX and the ITSM Implementation Simulator.

      Mental model

      How the ITSM processes fit together

      How incident, problem, change, request, service portfolio and CMDB records connect, with CIS-ITSM blueprint weightsIncidentrestore service25%Problemfind and remove the cause15%Changefix with controlled risk25%relatedworkaroundfixService Catalog and Request (25%)Catalog item → Request (REQ) → one Requested item (RITM) per item→ catalog tasks, driven by a flow, workflow or execution planService Portfolio (5%)services, offerings,portfoliosCMDB (5%)Configuration item, Affected CIs and Impacted Services/CIs on incidents, problems and changes
      Record relationships from the Problem Management process, request generation, request fulfillment and associated CIs documentation; weights from the CIS-ITSM blueprint. A mental model, not an official diagram.

      Incident restores, problem explains, change fixes. An incident moves through New, In Progress, On Hold, Resolved and Closed, or is Canceled when triage shows it is a duplicate or not an incident at all. On Hold always carries a reason: Awaiting Caller, Awaiting Change, Awaiting Problem or Awaiting Vendor (Incident life cycle). A problem can be linked to one or more incidents, and if a problem needs a change to be resolved, the change request goes through Change Management and the problem appears in a related list on the change form (Problem Management process).

      Priority is calculated, not chosen

      By default the incident Priority field is read-only and derives from Impact and Urgency through priority lookup rules; 1-High impact with 1-High urgency gives 1-Critical. To change the outcome you edit the lookup rules (data_lookup_admin or admin) or disable the read-only UI policy and write your own logic (priority lookup rules).

      Major incidents are a separate track

      Incidents become major incident candidates through trigger rules or by being proposed manually, and a major incident manager accepts or rejects them (source). The base system trigger rules are inactive by default (source). Resolving a major incident resolves its child incidents, and a post-incident report supports the review (source).

      Problem has its own pace. With the Madrid best-practice state model, a problem moves through New, Assess, Root Cause Analysis, Fix in Progress, Resolved and Closed; older instances use Open, Pending Change, Known Error and Closed or Resolved (Problem form). A workaround entered on the problem can be pushed to every related incident with Communicate Workaround (source), and a known error article records root cause and workaround in the knowledge base to deflect future incidents (source). ServiceNow advises against applying SLAs to an overall problem, because investigation can be a long-term effort (source).

      Which change request states normal, standard and emergency changes pass throughNormalNewAssessAuthorizeScheduledImplementReviewClosedStandardNewAssessAuthorizeScheduledImplementReviewClosedEmergencyNewAssessAuthorizeScheduledImplementReviewClosed
      Dashed states are bypassed. Standard changes skip Assess and Authorize; emergency changes go straight to Authorize for CAB approval (state model, change types). A mental model, not an official diagram.

      Change is about risk and timing. Standard changes are pre-authorised, low risk and repeatable; normal changes need assessment, peer or technical approval and CAB authorisation; emergency changes skip group and peer review and go to the CAB Approval group in Authorize (Change types). The same page notes that the change model field now supersedes the type field, though ITIL types are still supported. Conflict detection checks the CIs and planned dates against other scheduled changes, maintenance windows and blackout windows, including the CI's parents and children (Conflict detection). A CAB definition works like a recurring meeting invitation that generates CAB meetings (CAB definition).

      Request is a tree, not a ticket. Ordering from the catalog creates one request, with a separate requested item for each catalog item in it: two PCs, a chair and a desk give one REQ and three RITMs (request generation). Fulfilment is defined per item with Workflow Studio flows, workflows or execution plans (request fulfillment). Under execution plans, task outcomes roll up: one catalog task closed incomplete makes the RITM Closed Incomplete, and one RITM closed incomplete does the same to the request (state closure).

      The CMDB and portfolio give context. Use the Configuration item field on an incident for a single primary CI, and the Affected CIs or Impacted Services/CIs lists when several are involved (source). On a change, Refresh Impacted Services fills the impacted services list from the primary CI (source). Service Portfolio Management lets portfolio and service owners create and manage services, service offerings and portfolios (source).

      Implementer's shorthand

      Incident asks how do we get users working again? Problem asks why does this keep happening? Change asks is it safe to fix now? Request asks who does what to deliver this order? The CMDB tells all four what is affected. For the data side of that last question, see the CIS-Data Foundations hub.

      Worked scenarios

      Industry scenarios

      These are illustrative situations written by SNReady, not taken from the exam.

      Retail

      Store managers want to set every incident to P1

      Store managers log their own incidents and complain that they can't pick the priority. The service desk wants the priority matrix to reflect trading hours instead.

      Priority is read-only by default and comes from Impact and Urgency through priority lookup rules (source). The implementer's job is to agree the impact and urgency definitions and adjust the lookup rules, rather than making Priority editable. Changing Impact or Urgency on a saved incident makes Work notes mandatory, which leaves an audit trail.

      What the exam is checking: Knowing that priority is derived, and where its calculation is configured.

      Banking

      The same payment gateway error keeps coming back

      Dozens of incidents over three weeks share one symptom. Agents keep restarting a service, and nobody owns the underlying fault.

      This is a problem, not a bigger incident. Link the incidents to one problem (source), record the restart as a workaround and use Communicate Workaround to update all related incidents (source). Publish a known error article so the service desk can deflect new calls (source). When root cause is found, raise a change request from the problem, and once the problem is resolved, incidents on hold can be resolved from the problem form (source).

      What the exam is checking: Separating restoring service (incident) from removing the cause (problem), and the records that link them.

      Telecommunications

      The CAB agenda is full of certificate renewals

      Every routine TLS certificate renewal goes to CAB as a normal change. Meetings overrun, and an urgent fix for an active exploit waited a week.

      ServiceNow's own example of a standard change is a routine TLS certificate renewal, and its example of an emergency change is an out-of-band patch for an active exploit (source). Proposing the renewal as a standard change template puts it in the standard change catalog as a pre-approved change (source). Standard changes bypass Assess and Authorize, while emergency changes still need authorisation (source).

      What the exam is checking: Choosing the change type from risk and repeatability, and knowing which states each type passes through.

      Healthcare

      Onboarding a new nurse takes six separate forms

      Hiring managers order a laptop, a phone, badge access and application accounts one by one, retyping the same details each time. Some also misuse the catalog to report broken equipment.

      An order guide submits one request that generates several items, and its variables can cascade to the ordered items so common details are entered once (source). Variable sets let the same questions be reused across items (source). Reporting broken equipment belongs in a record producer, which creates a task record such as an incident instead of a requested item (source).

      What the exam is checking: Matching the catalog item type (standard item, order guide, record producer) to the requirement.

      Misconceptions

      Common CIS-ITSM misconceptions

      Misconception

      “Emergency changes skip approval.”

      What the sources say

      They skip group and peer review but still go to the Authorize state for approval by the CAB Approval group (Change types). Only standard changes are pre-approved.

      Misconception

      “Resolved and Closed mean the same thing.”

      What the sources say

      An incident is closed after it has been resolved for a set period. By default resolved incidents auto-close after 7 business days, and if the caller rejects the resolution, the incident goes back to In Progress (auto-close, life cycle).

      Misconception

      “A catalog order is one record.”

      What the sources say

      One request holds a separate requested item for each catalog item ordered (source), and with execution plans the request's closure state depends on its items and their catalog tasks (source).

      Misconception

      “A record producer is just a simpler catalog item for requests.”

      What the sources say

      Record producers create task-based records such as incidents. ServiceNow says not to create requested items from them; use catalog items so standard catalog processes run (Record Producer).

      Logistics

      CIS-ITSM logistics and the prerequisite rule

      Booking and delivery

      • Exams are registered and paid for in ServiceNow University and scheduled through Pearson VUE, signing in with SSO. Exam vouchers no longer exist (ServiceNow Community, Jan 2026; see also this July 2026 thread).
      • Training: on-demand courses are free but don't include an exam attempt; instructor-led training is paid ($1,900 for 2 days, $2,700 for 3 days) and includes the first attempt (source). Sources differ on whether a course is mandatory: the January 2026 summary says completing the course unlocks eligibility, while a May 2026 reply describes the recommended courses as “not required but highly recommended” (CAD thread). Check the registration page for your exam.
      • Once registered, you must sit the exam within 90 days or the attempt is forfeited. Exam payments are non-refundable, but you can reschedule without a fee inside the rescheduling window (source).

      CIS-ITSM format, fees and scoring

      • We couldn't find a public ServiceNow source for the current question count and time limit, so we don't quote one. Check the official CIS-ITSM blueprint after signing in to Now Learning.
      • Exam fee: $450 USD excluding tax (ServiceNow University). Retake fee: $225 USD (source).
      • ServiceNow doesn't publish the cut score: each exam is scored against a predetermined cut score that is not shared with candidates, and it is the same for everyone (ServiceNow Community, Jul 2026). Treat any “70% to pass” claim as a guess.
      Minimum waiting periods between exam attemptsAttempt 1Attempt 2wait 3 daysAttempt 3wait 30 daysAttempt 4+wait 6 months each
      Waiting periods between attempts, per the 2026 rules summarised on the ServiceNow Community.

      CIS-ITSM has a mandatory prerequisite: CIS-Data Foundations (CMDB and CSDM), per the blueprint and the exam registration page as recorded in our source data. Plan to pass CIS-DF first; the CIS-DF hub covers it, and the ServiceNow certification paths page shows where both sit in the track.

      Practice

      Practise the hand-offs

      Start with the free sample questions further down this page, then work through CIS-ITSM practice questions by topic and the CIS-ITSM study guide. For each scenario, name the record that should exist, the state it is in, and which process owns the next step.

      Sources

      Every exam fact and product behaviour on this page links to one of these ServiceNow sources. Check them before you book: exam rules change between releases.

      1. CIS-ITSM exam blueprint, KB0011560 (updated January 2026)
      2. ServiceNow Platform Implementation (Now Learning course page)
      3. CMDB Fundamentals (Now Learning course page)
      4. IT Service Management (ITSM) Implementation (ServiceNow University course page)
      5. IT Service Management (ITSM) Implementation Simulator (ServiceNow University course page)
      6. ITSM Fundamentals LabX (ServiceNow University course page)
      7. Incident life cycle
      8. Define priority lookup rules
      9. Configure incidents to close automatically
      10. Associate CIs with an incident
      11. Major Incident Management process
      12. Create a major incident candidate
      13. Create trigger rules for major incidents
      14. Problem Management process
      15. Managing Problems
      16. Problem form
      17. Communicate workaround for Problem
      18. Create a known error article
      19. Change types
      20. Change Management state model and transitions
      21. Standard change catalog
      22. Conflict detection
      23. Create a CAB definition
      24. Associated CIs on a change request
      25. Service Catalog request screens and request generation
      26. Service Catalog request fulfillment
      27. State closure in the request fulfillment execution plan
      28. Record Producer
      29. Order guides
      30. Service catalog variable sets
      31. Service Portfolio Management
      32. “Cost of Mainline certification exams”, ServiceNow University KB0013317
      33. Mark Roethof, “2026 exam vouchers, courses, exams & retakes – major changes explained”, ServiceNow Community, 18 Jan 2026
      34. “Exam vouchers eligibility”, ServiceNow Community, 6–8 Jul 2026
      35. “CAD Voucher”, ServiceNow Community Developer forum, 3 May 2026
      36. “CSA Exam” (cut score question), ServiceNow Community SysAdmin forum, 16 Jul 2026

      CIS-ITSM practice questions

      134 questions from 7 topics, 15 free

      Newest question added: AI-assisted drafts, not yet individually reviewedHow questions are made

      1
      application

      Staff at a branch office cannot connect to the VPN, and a service desk agent logs an incident for them. What is the agent's main goal under Incident Management?

      AIdentify the underlying cause of the repeated VPN failures
      BPlan and authorize a controlled change to the VPN gateway
      CRestore normal service while minimizing business impact
      DFulfill a catalog request for a replacement VPN service

      👆 Click an option above to select your answer

      Show answer and explanation

      Correct answer: C. Restore normal service while minimizing business impact

      ServiceNow describes Incident Management as restoring normal service operation while minimizing impact to business operations and maintaining quality. The agent's job is to get the branch connected again as quickly as possible. Finding the cause behind related incidents, controlling changes, and fulfilling requests are handled by Problem, Change, and Request Management.

      • Why A is wrong: Identifying the cause of errors that are reported as occurrences of related incidents is the purpose of Problem Management, not the goal of working this incident.
      • Why B is wrong: Change Management provides a systematic approach to control the life cycle of all changes. Authorizing a change is not the objective of handling the outage itself.
      • Why D is wrong: Request Management lets employees submit requests for services, products, or information. A broken VPN connection is a service disruption, not a catalog request.
      2
      application

      An agent applies a fix for a caller's broken printer driver and documents the resolution notes. The caller has not yet confirmed the fix works. Which incident state fits the incident at this point?

      ACanceled
      BOn Hold
      CResolved
      DClosed

      👆 Click an option above to select your answer

      Show answer and explanation

      Correct answer: C. Resolved

      In the incident life cycle, Resolved means a satisfactory fix is provided for the incident. An incident is marked Closed only after it has been in the Resolved state for a specific duration and it is confirmed that the incident is satisfactorily resolved. With the fix applied but not yet confirmed, Resolved is the right state.

      • Why A is wrong: Canceled is for an incident that was triaged but found to be a duplicate, unnecessary, or not an incident at all.
      • Why B is wrong: On Hold means responsibility shifts temporarily to another entity to provide information, evidence, or a resolution. Here the fix has already been provided.
      • Why D is wrong: Closed comes after the incident has been in Resolved for a specific duration and the resolution is confirmed, so it is too early to close.
      3
      application

      An admin builds a resolution SLA definition for incidents. The task SLA must complete when the incident reaches Resolved, whether or not it has already breached. Which SLA condition should check for State is Resolved?

      AStop condition
      BCancel condition
      CPause condition
      DReset condition

      👆 Click an option above to select your answer

      Show answer and explanation

      Correct answer: A. Stop condition

      The stop condition defines when the SLA completes: if all of the specified stop conditions match, the task SLA completes regardless of whether it is breached. Setting the stop condition to State is Resolved ends the resolution SLA when the incident is resolved.

      • Why B is wrong: A cancel condition defines when an attached SLA is canceled. It cancels the task SLA instead of completing it.
      • Why C is wrong: A pause condition only suspends the increase of elapsed time. The SLA resumes later and does not complete.
      • Why D is wrong: A reset condition completes the running SLA and attaches a new one when the start condition matches. It is meant for re-starting the SLA, not for ending it at resolution.
      4
      application

      A team plans next month's upgrade of a production database server. It is not in the standard change catalog, nothing is failing, and the work needs a peer review. How should the change be handled?

      AEmergency change sent straight to CAB approval
      BStandard change with peer approval but no CAB
      CNormal change needing peer approval and CAB
      DStandard change that skips peer and CAB approval

      👆 Click an option above to select your answer

      Show answer and explanation

      Correct answer: C. Normal change needing peer approval and CAB

      A normal change is any service change that is not a standard or emergency change. It requires assessment, peer or technical approval, and Change Advisory Board (CAB) authorization before implementation. ServiceNow's own example is a scheduled upgrade of a production database server that needs peer review and CAB authorization.

      • Why A is wrong: Emergency changes are high-priority changes to resolve a major incident or apply an urgent security patch. A planned upgrade with nothing failing does not qualify.
      • Why B is wrong: Standard changes do not require group or peer approval at all, and this work is not a pre-approved standard change.
      • Why D is wrong: Standard changes are pre-approved changes from a catalog of templates. This upgrade is not in the standard change catalog, so it cannot skip approvals.
      5
      understanding

      A change manager is asked to add a monthly certificate renewal to the standard change catalog. Which characteristic makes a change a good fit for the standard change type?

      AA scheduled window outside defined blackout periods
      BHigh risk that needs a full CAB assessment
      CAn active major incident that needs an immediate fix
      DRepeatable steps with a proven history of success

      👆 Click an option above to select your answer

      Show answer and explanation

      Correct answer: D. Repeatable steps with a proven history of success

      A standard change is a pre-authorized, low-risk, relatively common change that follows a specified procedure. It is frequently implemented, has repeatable implementation steps, and has a proven history of success. Because it is pre-approved, it skips group or peer approval and CAB authorization.

      • Why A is wrong: Scheduling outside change blackout windows is described for normal changes. It does not make a change standard.
      • Why B is wrong: Standard changes are low risk and do not require CAB authorization. A change that needs a full assessment is a normal change.
      • Why C is wrong: Changes made immediately to resolve a major incident are emergency changes, which go directly to CAB authorization.
      6
      application

      Over two weeks, the service desk logs many incidents about the same payroll application crashing. A problem record is opened for them. What is the main goal of Problem Management here?

      AAuthorize changes with minimal disruption
      BFulfill requests for services or information
      CRestore each user's access as fast as possible
      DFind the root cause and fix it permanently

      👆 Click an option above to select your answer

      Show answer and explanation

      Correct answer: D. Find the root cause and fix it permanently

      Problem Management helps identify the cause of errors in the IT infrastructure that are reported as occurrences of related incidents. Root cause investigation aims to analyze, track, and resolve recurring incidents permanently, for example through a change request that applies a permanent fix.

      • Why A is wrong: Controlling the life cycle of changes with minimum disruption to IT services is the purpose of Change Management.
      • Why B is wrong: Submitting and fulfilling requests for services, products, or information is the purpose of Request Management.
      • Why C is wrong: Restoring normal service while minimizing business impact is the goal of Incident Management, which handles each user's disruption.
      7
      application

      A problem coordinator has documented the cause and a workaround on a problem, but no permanent fix exists yet. They want the service desk and end users to find the workaround and deflect incidents. What should they create?

      AA known error article from the problem
      BA change request linked to the problem record
      CAn Accept Risk resolution on the problem
      DA problem task of type root cause analysis

      👆 Click an option above to select your answer

      Show answer and explanation

      Correct answer: A. A known error article from the problem

      Known error articles document the root cause and the workaround of the problem to help with deflecting incidents. You create one from the problem with the Create Known Error Article related link. The article is saved in the knowledge base and, depending on access controls, can be searched by users outside the IT team.

      • Why B is wrong: Creating or linking a change request is how a permanent fix is applied after clicking Fix. No permanent fix exists yet in this case.
      • Why C is wrong: Accept Risk moves the problem to Closed or Resolved with the Risk accepted code when there is no permanent resolution. It does not share the workaround.
      • Why D is wrong: A root cause analysis problem task is used to get help from a subject matter expert during investigation. It does not publish the workaround to others.
      8
      application

      A request fulfilled through an execution flow has one requested item (RITM) with three catalog tasks. Two tasks are Closed Complete and one is Closed Incomplete. How is the RITM closed?

      AClosed Complete, because most tasks completed
      BClosed Incomplete, because one task is incomplete
      CIt stays open until every task is Closed Complete
      DClosed Skipped, because one task did not finish

      👆 Click an option above to select your answer

      Show answer and explanation

      Correct answer: B. Closed Incomplete, because one task is incomplete

      In the request fulfillment execution plan, the RITM's closure state depends on its catalog tasks. If at least one catalog task is closed as Closed Incomplete, the RITM is closed as Closed Incomplete. The same rule then applies from the RITMs to the parent request.

      • Why A is wrong: A RITM is closed as Closed Complete only if all of its catalog tasks are Closed Complete, not most of them.
      • Why C is wrong: All three tasks are already closed. The rule does not require every task to be Closed Complete: if at least one catalog task is Closed Incomplete, the RITM is closed as Closed Incomplete.
      • Why D is wrong: A RITM is closed as Closed Skipped only if all of its catalog tasks are Closed Skipped.
      9
      application

      HR wants a New Employee Hire offering in the catalog. The requester enters the new hire's location and job title once, and a single request then orders business cards, a computer, and a cell phone. What should the catalog administrator create?

      AAn order guide
      BA record producer
      CA content item
      DA variable set

      👆 Click an option above to select your answer

      Show answer and explanation

      Correct answer: A. An order guide

      An order guide submits a single service catalog request that generates several items. ServiceNow's example is a New Employee Hire order guide where the customer provides the employee's location and job title, and the order guide then orders items such as business cards, a computer, and a cell phone. The information can be passed as cascading variables to the ordered items.

      • Why B is wrong: Record producers provide alternative ways to add information, such as incidents, through the service catalog. They do not bundle several items into one request.
      • Why C is wrong: Content items are catalog items that provide information instead of goods or services, so they cannot order equipment.
      • Why D is wrong: A variable set is a reusable collection of variables for catalog items and order guides. It is not an item that orders anything by itself.
      10
      application

      A service owner manages an Email service and wants a Gold tier and a Standard tier, each with its own availability guarantee and pricing. In Service Portfolio Management, how should each tier be represented?

      AA service offering of the Email service
      BA requested item for the Email catalog item
      CA service commitment with no parent offering
      DAn SLA definition for Email incidents

      👆 Click an option above to select your answer

      Show answer and explanation

      Correct answer: A. A service offering of the Email service

      A service offering derives from a service, tailoring the parent service to a specific business need. Each offering consists of a set of service commitments, which define the unique availability guarantees, scope, and pricing for that offering. The CSDM terms for Service Portfolio Management define a service offering as a stratification of a service into capability, availability, pricing, and packaging options, for example ITSM Standard and ITSM Pro. So Gold and Standard should be two service offerings of the Email service, each with its own commitments.

      • Why B is wrong: A requested item is created for each catalog item a user orders on a request. It records one order and does not define a service tier.
      • Why C is wrong: Service commitments belong to service offerings. To create service commitments, each service needs at least one associated service offering.
      • Why D is wrong: An SLA definition sets an amount of time for a task to reach a certain condition. It tracks work on records and does not define a tier of a service.
      11
      understanding

      Before rolling out new ITSM features, a CMDB manager is told to align the instance with the CSDM. How does the CSDM relate to the CMDB?

      AIt replaces the CMDB as the place where configuration items are stored
      BIt is a separate database that stores business service records
      CIt is a CMDB plugin that scans the network to find infrastructure items
      DIt prescribes how CIs and their relationships are modeled in the CMDB

      👆 Click an option above to select your answer

      Show answer and explanation

      Correct answer: D. It prescribes how CIs and their relationships are modeled in the CMDB

      The Common Service Data Model (CSDM) is the data model standard for all products that use the CMDB. It gives clear, prescriptive guidelines for service modeling within the CMDB, and its standards for defining CIs and the relationships between them help make sure your data resides in the appropriate CMDB tables.

      • Why A is wrong: The CSDM does not replace the CMDB. It is the data model standard for products that use the CMDB, and the data still resides in CMDB tables.
      • Why B is wrong: The CSDM is not a separate database. It provides guidelines for using base-system tables and relationships within the CMDB, so service data stays in CMDB tables.
      • Why C is wrong: Scanning and identifying infrastructure components to keep the CMDB up to date is what Discovery does. The CSDM is a data model, not a discovery tool.
      12
      application

      The service desk relies on an external hardware vendor's 4-hour replacement commitment to meet its own targets. An admin creates an SLA definition to track that vendor commitment. Which Type should they select?

      AUnderpinning contract
      BService commitment
      COperational level agreement
      DService level agreement

      👆 Click an option above to select your answer

      Show answer and explanation

      Correct answer: A. Underpinning contract

      The SLA definition Type field sets the type of agreement: SLA, OLA, or Underpinning contract. An underpinning contract is a contract with an external vendor that underpins the service delivered to the customer. The Type is used for reporting purposes only.

      • Why B is wrong: Service Commitment is a separate field on the SLA Definition form that differentiates a normal SLA definition from a service offering SLA definition. It is not a Type value.
      • Why C is wrong: An OLA is an operational level agreement between internal teams within the same organization. The vendor here is external.
      • Why D is wrong: An SLA type is a service level agreement between a service provider and an external customer, not an agreement with a supplier.
      13
      understanding

      An agent opens an incident and sees that its SLA timer component shows the Breached stage. What does this stage indicate?

      AThe task SLA was canceled before it could complete
      BThe task SLA is outside its schedule for the moment
      CThe task SLA is paused while the incident is on hold
      DThe time allocated to complete the task SLA is over

      👆 Click an option above to select your answer

      Show answer and explanation

      Correct answer: D. The time allocated to complete the task SLA is over

      The SLA timer component visually displays the current status of the task SLA. Its Breached stage is the stage of the timer when the time allocated to complete the task SLA is over, and the tooltip shows when the task breached.

      • Why A is wrong: A canceled task SLA appears in the Cancelled stage, with the cancellation time on the tooltip.
      • Why B is wrong: When the task SLA goes out of schedule, the timer shows the Out of Schedule stage, not Breached.
      • Why C is wrong: A paused or on-hold task SLA appears in the Paused stage, which keeps the color for the percentage elapsed when it paused.
      14
      application

      A CIO wants to know how the service desk's average time to resolve an incident compares with industry peers and top performers. What does the ServiceNow Benchmarks application provide for this?

      AScheduled email delivery of incident reports
      BWeighted rankings of records that need attention
      CProcess flows mined from your incident records
      DYour KPIs compared with industry peer averages

      👆 Click an option above to select your answer

      Show answer and explanation

      Correct answer: D. Your KPIs compared with industry peer averages

      The Benchmarks application gives visibility into your KPIs and trends, plus comparative insight relative to industry averages of your peers and the industry top performers. It collects daily data on your instance and aggregates it into monthly global benchmark reports. Average time to resolve an incident is one of its ITSM KPIs.

      • Why A is wrong: Generating and distributing scheduled reports by email is a Reporting feature, not the purpose of Benchmarks.
      • Why B is wrong: Ranking records of interest based on multiple weighted criteria is what Spotlight does.
      • Why C is wrong: Building automated process flows from your data to find inefficiencies is what Process Mining does.
      15
      applicationSelect all that apply

      A service catalog manager has opted in to Benchmarks and wants to compare request fulfillment with peers. Which two Service Catalog KPIs does Benchmarks provide? (Select two)

      A% of closed requests with breached SLAs
      BAverage price of the items on each request
      CAverage time to fulfill a request
      DMost frequent terms in request descriptions

      👆 Click an option above to select your answer

      Show answer and explanation

      Correct answer: A. % of closed requests with breached SLAs; C. Average time to fulfill a request

      The Benchmarks Service Catalog KPIs include % of closed requests with breached SLAs and Average time to fulfill a request (along with Number of requests created per user). Benchmarks KPIs are Performance Analytics indicators that only collect usage count data, such as monthly totals.

      • Why B is wrong: Item prices are information about requests, which Benchmarks does not consider. Its KPIs are based on monthly usage counts and durations.
      • Why D is wrong: Benchmarks KPIs only collect usage count data. During data collection, Benchmarks does not consider details such as incident descriptions or information about requests.

      Get Full CIS-ITSM Access

      Unlock all 134 practice questions with detailed explanations

      CIS-ITSM Only — Lifetime

      $9
      • All CIS-ITSM questions
      • Timed mock exams
      • Personalized study plan generator
      • Detailed explanations
      • Lifetime access — never expires
      BEST VALUE

      Lifetime Access

      $49
      • ALL certifications included
      • All practice questions
      • Timed mock exams
      • Personalized study plan generator
      • Detailed explanations
      • Lifetime access — never expires
      • Future updates included

      15 free questions available to try first • One-time payment, no subscription

      CIS-ITSM exam FAQ

      Is there a free CIS-ITSM practice test?

      15 of our 134 CIS-ITSM practice questions are free on this page, with explanations. The full set and timed mock exams cost $9 one-time.

      Is there a CIS-ITSM mock exam?

      Yes. The CIS-ITSM mock exam is timed and draws from the full question bank, with an explanation for every answer when you finish. It is included with full access.

      Are these real CIS-ITSM exam questions?

      No. SNReady questions are original practice questions, drafted with AI assistance against ServiceNow's documentation and the CIS-ITSM exam blueprint. They are not copied from the exam, and human review of them is still in progress. See how the questions are made.

      What does the CIS-ITSM exam cover?

      The official blueprint (KB0011560, updated January 2026) has 6 domains. The heaviest are Incident Management, Change Management and Service Catalog and Request Management, at 25% each. Every domain and objective is on the CIS-ITSM blueprint, explained.

      What is the CIS-ITSM passing score?

      ServiceNow does not publish the cut score, and the official exam blueprint says it is not always 70%.

      Do I need another certification before CIS-ITSM?

      Yes. CIS – Data Foundations (CMDB and CSDM) is a mandatory prerequisite for CIS-ITSM, according to the blueprint and exam registration page.

      Ready to Start Practicing?

      Begin with our free questions to assess your current knowledge level.